
THE FORD FALCON STORY...
The Ford Motor Company produced the Falcon family of vehicles from 1960
through the 1970 model years. Everything from sedans to vans to innovative small trucks
could be ordered with the Falcon emblem. Originally envisioned as a compact economy car,
Falcons evolved through four distinct body style phases. Of these, model years 1963-1965
are considered to be the most collectible. In the first five years of its existence, the
Falcon marque transitioned from bare bones econo-boxes to an array of small cars offering
sporty convertibles, as well as exciting V-8 powered cars.
The Falcon truck, called the Ranchero, began its life in 1957 as part
of the Fairlane lineup. In 1960, the design was drastically restyled to align itself with
the Falcon design family. It continued to be a highly successful part of the Falcon line
until 1966, when Ford began to market it separately from the rest of the Falcons. In 1967,
this divorce was formalized when the Ranchero rejoined the Fairlanes. It enjoyed great
sales success for many years afterwards in that role.

The Roots Of Ranchero
The
Original 1957 Ford Ranchero (left), Along With The Car From Which It Was Derived, The 1957
Ford Fairlane. Note The Difference Between This Body Style And The Radically Restyled 1960
Falcon Ranchero Pictured Below.
The Falcon marque began to realize its potential when, late in the 1964
model year, Ford introduced the Mustang, another sporty compact car that achieved some
(small) amount of popularity. Ford utilized the Falcon's unitized chassis, as well as many
elements of the Falcon drive train, to "re-skin" and "re-market" the
Mustang. From then on, the Falcon existed in the shadow of its more popular offspring,
finally fading away in 1971, a victim of corporate marketing neglect. The success of the
Volkswagen and other compacts, along with the Arab oil embargo just a few years later,
proved how forward-thinking the original Falcon designers were. Like many good ideas, it
peaked just a little too early.
Collectors of these great cars appreciate the compact design, the
simplicity of maintenance and operation, and the innovative thinking of its designers.
Simply put, they are a lot of fun. If you are looking for a great car to restore and
enjoy, consider a classic Ford Falcon or Falcon Ranchero.
FALCON DESIGN DEVELOPMENT
Generation 1: Round Body (1960-1963)
Generation 2: Square Body (1964-1965)
Generation 3: Mustang Derivative Styling(1966-1970)
Generation 4: Torino Clone (1970 1/2)
Falcon Wagons And Econolines
Other Falcons: Canada Falcons

Falcons of Canada
Other Falcons: Argentina Falcons

Falcons of Argentina
Other Falcons: Australia Falcons


1967 XR FALCON
Other Falcons: Racing Falcons

Picture by Tommy McNeely
Racing Falcons
Other Falcons: Special Edition Falcons

Kansas Centennial Special
Ford Engines: 144 Six

Ford Engines: 170 Six

Specifications
Ford Engines: 200 Six
Specifications
Ford Engines: 260 V8

Specifications
Ford Engines: 289 V8

Specifications
Ford Engines: 302 V8

Specifications
READING RESOURCES:
Ray Miller, FALCON!: THE NEW SIZE FORD, (Evergreen Press, 1983). An
essential pictorial history of the Falcon and Ranchero. Drifts in and out of print, but is
currently available. Hardback.
Phil Cottrill, THE FORD FALCON: 1960-1963, (Rigel, 1983). The only extensive
history of early Falcon development ever written. Includes fascinating developmental
photos of the Falcon, including a four-door convertible prototype, and other designs that
you'll be glad never made it into production. No longer in print, but can be found at swap
meets, etc. Paperbound.
FORD FALCON: 1960-1970, (Brookland Books). A collection of reprinted
magazine articles about the Ford Falcon, starting with the 1960 Motor Trend road test,
through the Road Test magazine review of the 1970 1/2 Falcon. Includes articles featuring
how to fit a 312 c.i.d. Y-Block into a 1960 Falcon (Hot Rod), the Falcon Convertible
(Motor Trend and Car Life), 63 Sprint Monte Carlo racers (Car Life), and other reviews,
Very informative. Softbound.
THE FALCON NEWS TECHNICAL TIPS MANUAL. A collection of technical tips for
Falcon restorers collected from the pages of the Falcon Club of America's newsletter, The
Falcon News. This material covers almost ten years worth of member-submitted material
on all topics. Includes production charts, production code interpretation charts, and many
other useful items.
Note: The Ray Miller Falcon! Book And The FCA Tech
Tips Manual Are Available through the Falcon Club
of America Store.
FALCON DEVELOPMENT CHRONOLOGY
(From Phil Cottrill's Book, The Ford Falcon: 1960-1963)
1942-1946: Ford Light Car Project developed 7 pilot models on wheelbases from 97-112
inches.
1945: Earle S. MacPherson was appointed chief engineer of Chevrolet Cadet project.
1952: Robert S. MacNamara was made Assistant General Manager of Ford Division. He
immediately appointed a Market Research Unit to study who was buying the Volkswagon and
why.
1956: Ford management was firmly convinced that a car sized between the Volkswagon and the
standard Ford could be successfully marketed.
1957, March: Ford Motor Company committed itself to build the Falcon.
1957: A low weight six cylinder OHV engine was developed for the Falcon.
1957, November: Ford President, E.R. Breech, announced to Ford management that the optimum
economy car appeared to be the 2,400 pound car with a six cylinder engine.
1958, Summer: Falcon clay model finalized and accepted by Ford management.
1958: Jack Hooven appointed chief engineer for Falcon development.
1959, February: The New York Times published an article about the Ford
XK-Thunderbird project.
1959, May 21: Henry Ford II announced the Falcon Project at a Ford stockholders' meeting.
1959: The first non-prototype Falcons assembled at the Ford Pilot Assembly Plant.
1959, September 9: The 1960 Falcon was released to the press.
1959, September 10: 14 Falcons with experienced endurance drivers began covering every
mile of Federally numbered highways in the continental United States.
1959, October 2: The 1960 Corvair arrived at dealer showrooms.
1959, October 3: The 1960 Falcon made its public debut.
1959, October 29: Plymouth's 1960 Valiant goes on public display.
1959, November: Falcon sales take off and Falcon soon becomes "King Of The
Compacts."
1960, Winter: Falcon Station Wagons introduced.
1960, Spring: 1960 Ranchero introduced.
1960, September 25: 1961 Falcon line introduced. It included the 170 inch engine and the
Econoline utility vehicles.
1960, December: Robert S. MacNamara left Ford to become Secretary of Defense. The Falcon
lost its strong backing.
1961, Early: The Falcon Sedan Delivery was introduced.
1961, April 9: 1961 Futura introduced to combat [Corvair] Monza Coupe sales.
1961, September 19: 1962 Falcon line introduced.
1962, February 14: 1962 Sports Futura with four speed transmission introduced.
1962, September 11: 1963 Falcon line introduced, including Falcon convertible.
1963, February: 1963 1/2 Falcons introduced. Included 260 V-8, hardtops, and the Sprint
line.
1963, July: Last 1963 1/2 Falcons produced. Dies shipped to Argentina.
OTHER DATES IN FALCON HISTORY
1964, April: The Ford Mustang introduced late in the 1964 model year.
1965: Falcon Sprint production falls off sharply, the Mustang having co-opted its market
niche. Less than 3,000 1965 Falcon Sprint hardtops and less than 500 Sprint convertibles
in production. This is the last year for the Falcon Sprints. Ford produced other
"Sprints" (a 6 cyl. Mustang model and a souped-up Maverick model both wore that
name), but these were to be mere shadows of the original.
1966: Falcon line again promoted as an economical alternative to the Mustang, as well as
the Ford line generally. With the new body style, Falcon hardtops and convertibles are
dropped from the lineup. Except for minor changes, this third-generation body style would
continue almost until the end.
1967: Ranchero's association with the Falcon line is dropped. The disassociation process
has started in the 1966 model year. From the beginning of the 1967 model year onward, the
Ranchero was reunited with the Fairlane marque, having been introduced as such in 1957. It
continued on as a successful Ford product for many years thereafter.
1971, January: The 1970 1/2 Falcon was introduced based on the Torino body, with Falcon
badging. The design was poorly received and the Falcon marque was dropped at the end of
the model year. Rumors persisted that Ford dealers were provided with re-badging kits to
convert these Falcons to Torinos in an effort to improve sales. The Ford Maverick assumed
the original Falcon mantle as the Ford economy-class car. This marketing heritage can be
followed through to the present day via the Escort, Tempo, and Contour.
FALCON QUOTABLE
"We are just now beginning to understand what influence and impact that the Ford
Falcon had upon the U.S. automobile industry and what a boon it was to the Ford Motor
Company. Within weeks of introduction in the fall of 1959, it became a runaway seller in
the new compact car field as well as an important money maker for Ford.
"More important that its obvious success during the 1960-1963 model years was its
less salient role as a progenitor of its evolutionary forms. Mike Davis, in an article in
May, 1981 CAR EXCHANGE, first made us aware of the varied Ford products that were
really Falcons in disguise. His main criterion for determining a Falcon derivative was the
car's chassis. The name, engine, and sheet metal could be changed, but the underbody
structure went all the way back to the 1960 Falcon. For example, when the Ford
Granada-Mercury Monarch appeared in the mid-seventies, an article pointed out that the,
'underbody pan from the floor under the dash all the way back to the gas tank came from
the 1970 Maverick'. The '70 Maverick was very much '60 Falcon. Mr. Davis lists the
following cars as basically Falcon: [the Canadian] Frontenac, '64 1/2-'73 Mustang, the
whole Econoline series, '67-'73 Cougar, Maverick, Granada and Monarch through '80, Lincoln
Versailles, Torino and Montego through '72, Fairlane and Meteor, '60-'73 Ranchero, plus
all the Falcons produced in Argentina, Canada, Mexico, Brazil, and Chile. Many other
countries receive disassembled Falcons that were reassembled upon arrival.
"When production figures are applied to the above list of Falcon-based marques, Mr.
Davis notes that the total surpasses even the Model T Ford production. Given a few more
years for the continued Falcon production in Argentina and Australia, the Falcon will
claim the all-time production record from Volkswagen. And the VW started in the
1930's!"
Phil Cottrill, The Ford Falcon: 1960-1963.
"Just sneaking in under my time line, with a launch in late 1959, was the Ford
Falcon. Contrasting it with the Corvair, we said: 'Ford has taken the opposite tack from
its major competitor and produced an absolutely normal compact car and in so doing has
come up with something quite new.' The Falcon was, in fact, the breath of fresh air the
industry needed after the suffocating excesses of the late Fifties. GM immediately copied
the Falcon, building the Chevy II, later the Nova. Without those new platforms, there
would have been no Mustangs, Cougars, Camaros, and Firebirds. By celebrating simplicity,
the Falcon set new standards. It's a lesson some could relearn today."
Automotive writer Karl Ludvigsen (reprinted from Car &
Driver Magazine, July, 1995, and further reprinted by the FALCON NEWS, November, 1995.)
"The greatest accomplishment of the Corvair, Falcon, and Valiant is not listed in
their specifications. It is the greater choice they have given the America car buyer. No
longer is he restricted to one kind of car, with variations in chrome or fins according to
how much money he will pay."
Motor Life, December, 1959.
The Ford Motor Company won a close race with coincidence. Both Ford
and the Chrysler Corporation, unknown to each other, chose the name Falcon for their new
small cars. But because Ford reserved the name with the industry registry only twenty
minutes ahead of Chrysler, it won the right to the name.
"Ford and Chrysler independently settled on Falcon, but Ford won by notifying the
Automobile Manufacturers Association of its choice twenty minutes ahead of Chrysler. The
association is the official industry arbiter and its Proprietary Name File is the
tradename Bible for the car makers.
"Actually Chrysler was said to have been the first to indicate its interest in the
name Falcon, when it asked that a search be made on the availability of the name.
"The report was made, but while the company was making its final decision, Ford
called and registered the name, unaware, association officials said, that Chrysler was
considering it too.
"Falcon is not new to the automobile industry. The roster of 2600 names that have
graced the automobile scene in the last sixty years shows that Falcon was used by two
other manufacturers. A Falcon passenger car was made in 1922 and a Falcon-Knight was
marketed in 1926.
"Two Auto Makers Pick The Same Names," THE NEW
YORK TIMES, May 21, 1959.
reprinted in: Ray Miller, FALCON!, (Evergreen Press, 1983).
Special thanks to Brian Sullivan for assembling
most of this information.



This page last updated: 07/23/07
